RAR series

rc.jpg (41162 bytes)

 

 Aluminum Cylinders
  • Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
  • Built-in safety valve prevents accidental over-pressurization
  • Hard-Coat finish on all surfaces resits damage and extends cylinder life
  • Handles standard on all models
  • Double-acting for rapid retraction, regardless of hose lengths and system losses
  • Composite bearings prevent metal to metal contact, increasing cylinder life and resistance to side-loads of up to 10%
  • Steel baseplate and saddle for protection against load-induced damage

    Catalog Pages in pdf format (499 kb)

Cylinder
Capacity @
10000 psi
tons
Stroke
  Model  Number
Cylinder Effective Area

in2
Cylinder
Capacity
in3
Coll.
Height
A
 Outside Diameter D
Weight
Push
Pull
in
Push
Pull
Push
Pull
in
 in
lbs
24.2  14.4
1.97
  RAR-202
4.84
2.88
3.1
5.7
7.44
 4.45
16.3
3.94
  RAR-204
6.1
11.4
9.41
17.6
5.91
  RAR-206
9.2
17.0
11.38
19.0
7.87  RAR-208
12.2
22.7
13.35
20.3
9.84  RAR-2010
15.3
28.4
15.31
21.6
34.3
19.0
 1.97  RAR-302
6.85
3.80
3.1
7.5
7.91
 4.92
19.0
3.94  RAR-304
6.1
15.0
9.88
20.9
5.91  RAR-306
9.2
22.4
11.85
22.9
7.87  RAR-308
12.2
29.9
13.82
24.9
9.84  RAR-3010
15.3
37.4
15.79
26.9
54.9
20.7
 1.97  RAR-502
10.99
4.14
3.1
8.1
7.91
 5.71
24.5
3.94  RAR-504
6.1
16.3
9.88
28.0
5.91  RAR-506
9.2
24.4
11.85
31.5
7.87
  RAR-508
12.2
32.6
13.82
35.1
9.84  RAR-5010
15.3
40.7
15.79
38.6
110.9
61.6
 1.97  RAR-1002
22.18
12.32
3.1
24.3
9.88
 7.28
36.2
3.94  RAR-1004
6.1
48.5
11.85
42.5
5.91  RAR-1006
9.2
72.8
13.82
48.9
7.87  RAR-1008
12.2
97.0
15.79
55.3
9.84  RAR-10010
15.3
121.3
17.76
61.7
175.9
102.3
 1.97  RAR-1502
35.19
20.46
3.1
40.3
9.76
 9.06
53.4
3.94  RAR-1504
6.1
80.6
11.73
63.7
5.91  RAR-1506
9.2
120.8
13.70
73.2
7.87  RAR-1508
12.2
161.1
15.67
83.6
9.84  RAR-15010
15.3
201.4
17.64
93.9

• Made to order. Consult Enerpac for delivery
Aluminium differs from steel in that it has a lower finite fatigue life. This means that aluminium cylinders should NOT be used in high-cycle applications, such as production.

The Enerpac line of aluminium cylinders are designed to provide 5000 full-pressure cycles. This limit should not be exceeded. In normal lifting and many maintenance applications, this will provide a lifetime on use.

© Enerpac 2004
www.enerpac.com